 |
 |
|
 METABLEN
C, E, W and S type are a family of core-shell type impact
modifiers, each of which offers unique benefits to manufacturers
of thermoplastics products. These impact modifiers do
not only improve impact strength but also give other additional
benefits depending on the selection of rubber.
METABLEN C and E type have butadiene-based rubber to give
super high impact strength.
METABLEN W type has acrylic-based rubber to give excellent
weatherability.
METABLEN S type has silicone-acrylic-based rubber to achieve
both super high impact strength and excellent weatherability. |
|
|
 |
|
|
| Matrix Resin: |
| PC : |
Polycarbonate |
PA : |
Polyamide |
| PS : |
Polystyrene |
PE : |
Polyethylene |
| PP : |
Polypropylene |
PBT : |
Polybutylene terephthalate |
| PET : |
Polyethylene terephthalate |
ABS: |
Acrylonitrile-Butadiene-Styrene resin |
| PVC : |
Polyvinyl chloride |
PMMA : |
Polymethyl methacrylate |
| Type |
Grade |
Characteristic |
Matrix Resin |
S
|
Silicone- acrylic rubber
|
S-2001 |
Weatherability, High impact, Impact resistance
at low temperature |
PC, PBT, PA, PET
PS, PVC, ABS, PMMA |
SRK200
|
Heat resistance, Impact resistance at low temperature |
| SX-006 |
Coloring ability, Flowability, Chemical resistance |
| W |
Acrylic rubber |
W-450A
|
High impact, Weatherability |
PC, PBT, PVC, PMMA |
| W-300A |
Weatherability, Transparency* |
PVC, PMMA |
| W-341 |
Soft acrylic resin (Details)
|
PMMA |
| E |
Impact modifier for engineering plastics |
E-905 |
High impact
|
PC, PBT, PA |
| C |
MBS
(Butadiene rubber)
|
C-223A
|
High impact
|
PC, PBT, PA, PS, PVC |
| C-323A |
| C-303A |
Transparency * |
| C-215A |
| C-201A |
| C-202 |
| C-102 |
| C-140A |
High transparency *, Less crease whitening |
| C-132 |
Product is powder. (Only W-341 is flake.)
* is only for Polyvinyl chloride(PVC). |
|
|
 |
|
|
| METABLEN W-341 is a soft acrylic resin,
which is easy to apply for calendering. In addition, METABLEN
W-341 also applies as impact modifier for thermoplastics
because it has a core-shell type structure, composed soft
acrylic segment (low Tg) as a core and hard acrylic segment
(high Tg) as a shell. |
|
|
|
