| TRADE NAME |
METABLEN |
| FREIGHT CLASSIFICATION |
Plastics, White powder |
| FUNCTIONS |
The modifiers for various plastics
|
| LEGALITIES |
 Registered
on lists of existing substances
As registered
numbers differ grade to grade, reference requested |
| PHISICAL DATA |
Appearance
|
White powder
|
| Specific gravity (water=1) |
1. 0-1. 2 |
|
| SPECIAL PROTECTION INFORMATION |
| Type of ventilation
|
Exhaust ventilation should
be provided. |
Respiratory protection
|
None required for normal
operations. |
| Protective groves |
Recommended use impervious
gloves to avoid irritation. |
| Eye protection |
Safety glasses with side
shields. |
| Other protective equipment |
Eyewash facility should be
provided. |
|
| EMRGENCY AND FIRST AID PROCEDURES |
Inhalation
|
Move subject
to fresh air. |
| Eye and skin contact |
Flush eyes with large amount
of water.
Consult a physician if irritation persists. Wash affected skin
areas with soap and water. |
| Ingestion |
Material is inert and should
not cause any harmful effects under normal circumstances. |
|
| REACTIVITY INFORMATION |
Stability
|
Stable |
| Conditions to avoid |
Thermal decomposition rapidly
occurs at temperature greater than 350
(660 ).
Avoid contact with ignition sources.
Thermal oxidation rapidly increases at greater than 200
(390 ).Avoid
stock at hot place. |
| Hazardous decomoisition
products |
Thermal docomposition may
yield carbon and acrylic monomers. |
|
| SPILL OR LEAK PROCEDURES |
Steps
to be taken in case material is released of spilled
|
Sweep up and
shovel into containers for recovery or disoisal. |
| Waste disposal methods |
Incinerate in approved equipment
or bury in ground. |
|
| STRAGE AND FACILITY |
Indoor
|
Yes |
| Heated |
No |
| Outdoor |
No |
|
