| |
 Main
Features |
 |
Handles everything
from batch production to continuous production
Makes it possible to operate a stable, uniform, reliable production
line that ensures efficient and labor-saving production, as well as
high-quality products. |
|
Designed to meet customers' specific
needs
Our more than 30 years of experience in plastic board manufacturing
enables us to design products that take into account customers' precise
requirements. |
| |
|
| Single
belt casting machine |
|
We undertake production of films and
sheets using precision gear pumps, specially designed T dies, and
an automatic lip width adjustment device. We employ a mirror-polished
belt, developed to improve width precision. |
| |
 |
| |
|
|
DBP - Double Belt Press Machine |
|
Foaming plastic board is produced by
continuous heating and cooling on a belt press, after feeding plastic
through an extruder. The product's thickness is determined by adjusting
the height and temperature of the press roller and controlling the
pressure settings. In each zone, the belt surface is printed on the
surface of the product.
This method has been used primarily in the production of foaming
plastic board, but it is also being employed in the production of
boards made of environmentally friendly materials such as natural
fibers and plastic resin or scrap wood (sawdust) and adhesives. |
| |
 |
| |
| Specialty
High-Temperature Double Belt Press Machine |
|
This device conducts lamination under
high temperatures and pressurized conditions using a guided, heated
roll, operating at a maximum temperature of 400 degrees centigrade.
MRE offers auxiliary devices such as feeders, winders, and thickness
measurers on an optional basis. This device is used for making substrates
(copper foil, special film and copper foil). |
| |
 |
| |
|
| Hydraulic
Double Belt Press Machine |
|
Presses are installed inside a steel
belt, pressing the material being processed from above and below.
The use of hydraulic presses ensures that the surface pressure is
uniform. |
| |
 |
| |
|
| Test
Device |
|
MRE's test devices adhere to the
specifications listed below: Conduct a sample test to experience
the benefits of this device and see how it can contribute to creating
the optimal process. |
| |
|
| |
 |
|
 |
| Test device specifications |
 |
Line speed: |
0.1-10.0mm/min. |
|
Pressure: |
1000N/cm |
|
Temperatures |
Heating: up to 400 Centigrade
Cooling: 15-140 Centigrade |
|
Belt |
Upper: W700xt1.2mm
Lower: W700xt1.2mm
|
|
Effective press size: W650mm |
|
|
|
| |
|
