Our filtration modules employ the one-way system, thus avoiding the wastage problems inherent in partial filtration systems, as well as greatly simplifying the piping required and eliminating energy loss. Hardly any portions of the filter other than the membrane itself come into contact with the liquid, and thus the amount of impurities dissolved is extremely small, enabling the production of filtered water of very high purity. MRE's hollow-fiber membrane has high tensile strength and does not require a supporting mesh. We are therefore able to produce a compact filtration unit that nonetheless contains a large-area membrane. As the outer case can be thrown away, there is no need to clean the housing when changing filters. This greatly contributes to improved sanitation. Our compact filtration units are ideal for incorporation into other equipment. Because of the larger-than-expected area of the membrane in spite of its compact body, this product has a long useful life. Settings can be adjusted to allow the production of various levels of water quality, from ultra-pure water to ordinary household tap-water quality. We offer water filtration units employing permanently hydrophilic membranes and air filtration units employing hydrophobic fibers Thanks to the small amount of hydrophobic fibers included in the membrane, any air that enters the system is transported to the outside of the filter, and thus the "air-lock” phenomenon does not occur. This structure eliminates the need for special air-removal operations.       Easy to use by all-in-one type module       Water 1L/min, air 42NL/min     Water 4L/min, air 140NL/min     Water 8L/min, air 200NL/min       Interchangeable module, high flux and low-cost     water 25L/min         air filtration     objective : standard air production for prticle counter     module : Sterapore-H         Photograph : RION CO.,LTD Back to Top